PDM220 Compact Differential Pressure Sensor

The PDM220 series pressure sensors provide accurate differential pressure measurement of gas and liquids in ranges from 250mbar up to 600bar. Standard unamplified and amplified analogue outputs are available : mV/V, 0.5-4.5Vdc, 0-5Vdc and 2-wire 4 to 20mA current loop. They are suitable for uni or bi-directional measurement. Their construction being all stainless steel, they are compatible with most media, including corrosive fluids used in automotive and aerospace industries.

Features

  • Wet/wet differential pressure
  • All Stainless steel
  • Outputs : 0-5V, 4-20mA, 0,5-4,5V
  • Operating from -40 to +125°C

Applications

  • Automotive – on vehicule
  • Aerospace
  • Energy / Nuclear
  • Test benches

View all pressure sensors here.

 

Description

The EFE PDM220 compact differential pressure sensor provides an accurate pressure measurement of gas and liquids in ranges from 250mbar up to 600bar. Standard unamplified and amplified analogue outputs are available : mV/V, 0.5-4.5Vdc, 0-5Vdc and 2-wire 4 to 20mA current loop. They are suitable for uni or bi-directional measurement. Their construction being all stainless steel, they are compatible with most media, including corrosive fluids used in automotive and aerospace industries.

Features of PDM220 Compact Pressure Sensor

  • Wet/wet differential pressure
  • All Stainless steel
  • Outputs : 0-5V, 4-20mA, 0,5-4,5V
  • Operating from -40 to +125°C

Applications

  • Automotive – on vehicule
  • Aerospace
  • Energy / Nuclear
  • Test benches

The EFE Engineering Department is responsible for designing all our sensors, from sensing elements to state of the art PCBs. To meet the customer’s high requirements, EFE decided very early on to develop its propriety sensing technology for pressure transducers. This technology, thin film, is manufactured mainly using a physical vapour deposit, and more precisely sputtering process on a metal diaphragm (stainless steel, titanium, inconel, hastelloy, etc.). This film is used by EFE is the only technology which does not require any intermediary between the sensing element and the fluid to be measured as with an oil separator for silicon based sensors or O-rings for ceramic technology.

View all EFE products here.

Follow us on Facebook

Model Power Supply Output Signal Consumption
PDM221 10Vdc stabilised and regulated mV/V <10mA
PDM224 15 to 30Vdc 0-5Vdc <10mA
PDM225 12 to 30Vdc 4-20mA - 2 wires Current Loop
PDM227 8 to 30Vdc 0.5-4.5Vdc unregulated power supply <10mA
Bi-directional pressure ranges (FS) ±250mbar ; ±500mbar
±1bar ; ±2bar ; ±3bar ; ±5bar ; ±10bar ; ±20bar ; ±40bar ; ±100bar ; ±250bar ; ±400bar ; ±600bar
Uni-directional pressure ranges (FS) 250mbar ; 500mbar
1bar ; 2bar ; 3bar ; 5bar ; 10bar ; 20bar ; 40bar ; 100bar ; 250bar ; 400bar ; 600bar
Type Differential
Mechanical connection 1/4 Gaz A male
1/4 NPT male
M14x1.5-4h male
Optional :
7/16-20 UNJF-3A male - MS33656-4
M10x1-4h male with 80° internal cone
Electrical Connection DIN 43650 Receptacle - 4 pins
Optional :
Hermetic MIL-C-26482 - 6 pins Receptacle
Size Industrial
Diameter 22mm
Material(s) of wetted parts Stainless Steel 316L
Stainless Steel 17-4PH
Stainless steel 15-5PH
Compensated temperature range 0 to +60°C
Optional :
-25 to +85°C
-25 to +125°C
Combined thermal zero & sensitivity shifts ±0.02% FS/°C
Non linearity and hysteresis combined ±0.25% FS
Optional :
±0.15% FS
Non repeatability ±0.05% FS
Signal bandwidth 1000Hz @ -3dB
Product category High Performance Sensors
Specialty Sensors
Industrial Sensors