ความเป็นเลิศด้านวิศวกรรม
APEM KL series power rocker switches available with 2 or 3 positions, with one locked position. Actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.
Available with a wide choice of colours with laser etched symbols. Rocker switches can be illuminated or non-illuminated. 20 Amp version. Elastomer membrane. IP69K panel sealing.
View all rocker switches here.
The APEM KL series panel mounting power rocker switch is available with 2 or 3 positions, with one locked position. Actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.
View all APEM products here.
Follow us on Facebook
• Mechanical life : 150,000 cycles min.
• Panel thickness : 0.8 mm to 4.6 mm
• Recommended panel thickness : between 2 mm and 3.5 mm
ENVIRONMENTAL SPECIFICATIONS
• Sealing options :
K : IP68 to front panel components of switch only according to IEC 60529
Z : IP69K panel sealing according to DIN 40050-9
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Operating temperature :-40 °C to +85 °C (-40 °F to +185 °F)
MATERIALS
• Case : PA 6-6
• Actuator and unlocking actuator : ABS or elastomeric membrane
• Bezel : PA 6-6
• Contacts & terminals : brass, solid silver grain, silver plated (A) or brass, solid silver grain, gold plated (D)
• Contact roller : brass, nickel plated
• Currrent/voltage rating with resistive load :
- Silver plated contacts :
A : 5 A 24 VDC, 100,000 cycles - 10 A 24 VDC, 10,000 cycles (terminals 6.35 x 0.8 only)
S : 20 A 12 VDC, 10,000 cycles
- Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength : 2,000 Vrms 50 Hz min. between terminals
