ความเป็นเลิศด้านวิศวกรรม
Illumec 4F series is an illuminated switch with the same slide-on cap retention system as Multimec 3F series. The illumination is created with one or two integrated chip-LEDs.
Caps that can be mounted on illumec 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.
MAIN FEATURES
The MEC Illumec 4F series is an illuminated switch with the same slide-on cap retention system as Multimec 3F series. The illumination is created with one or two integrated chip-LEDs.
Caps that can be mounted on illumec 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.
Follow us on Facebook
• illumination with integrated chip-LEDs
• Through-hole (TH) or surface mount (SMD)
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime
• Temperature range: -40/+160 °C
• IP67 sealing
Actuation force: 3.5 N
MATERIALS
• Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver: Stainless steel (+ 3μAg)
Gold: Stainless steel (+ 1μAu)
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
• Terminals: SnCu + 2μNI + 3μSn100
• Contact resistance: 10 M Ω
• Recommended load:
Silver: 0.5 - 50 mA 24 Vdc
Gold: 0.5μ - 50 mA 24 Vdc
• Contact bounce: <2 mS - typically 0.5 mS
• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• Soldering(TH): IEC 68-2-20
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMENTAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67
• VIBRATION TEST IEC 68-2-6
• Cycles: 10
• Cycles time: 2 hrs
• Standard actuation force: 3.5 N type
• Max. Actuation force: 100 N for 10 sec
• Key travel: 1 mm
• Lifetime: >10,000,000
