HI Handle

The HI Handle, which is available as a left or right hand option, offers a wide range of proportional, non-contacting roller and high-life, push-button switch combinations. Whereas most competitive products can support for just three roller functions, the HI grip can accommodate up to four.

  • Ergonomic design with left- and right-hand options
  • Front panel combinations including three rollers or up to eight switches
  • Rear panel combinations of one roller or up to two switches
  • Multi-colour options for rollers and switches
  • 16 logo options for switches
  • Available pre-fitted JC6000 or JC8000 or as a stand-alone grip
  • Robust design for arduous applications
  • Sealed to IP67t
  • EMC performance to 150V/m
  • MTTFD > 900 years

A contoured front panel means the rollers are within an easy sweep of an operator’s thumb, while the switch arrays are angled to allow for similarly convenient actuation.

The controls on the rear panel are situated to provide comfortable operation with a first finger. To further enhance operator comfort, both handed options are oriented to lean forward and inwards. For maximum, application-specific flexibility, each roller and switch is offered in nine colour options. Further customisation is possible by a choice of 16 logos which can be printed in each of the switches.

In addition to being supplied fitted to a JC6000 or JC8000 joystick, the HI grip can be supplied as a stand-alone product with an industry-standard, threaded mount and flying leads.

Careful material selection ensures maximum robustness to impact, liquids and dust, with the enclosure being sealed to IP67. An EMC performance level of 150V/m is provided and the overall design achieves an MTTFD in excess of 900 years.

 

Data Sheet

Technical Data Sheet

FRONT PANEL REAR PANEL
Roller (s) Switches Roller (s) Switches
0 2-8 0 0-2
1, 2 or 3 2-5 1 0 or 1

Supply Voltage 5Vdc ± 0.5Vdc for the rollers>
Roller Output Voltage (Factory Set) 10% to 90% of Supply Voltage
Roller Centring Accuracy 50% ±5.5% of Supply Voltage
Roller Current Consumption 10mA max. per roller
Switch 24V, 50mA maximum per switch
Grip Connection Flying Lead

Maximum Overload - Static 600N - applied at the centre of the grip
Maximum Overload - Impact 10 Joules
Maximum Rotational Load - Static 40Nm
Weight 290g nominal
Roller Operating Angle ±35° for front rollers; ±25° for rear roller
Roller Mechanical Life 5 million cycles
Switch Type Normally-open-momentary
Switch Travel 1mm
Switch Operating Force 3.5N Nominal
Switch Mechanical Life >5 Million cycles
MTTFD >900 years

Operating Temperature -40°C to 85°C
Storage Temperature -40°C to 85°C
Environmental Protection IP66 and IP67
Salt Mist EN60068-2-11: 1999 96 hours
EMC Immunity Level ISO 11452-2: 2004 80% AM Peak modulation, 150 V/m 80 MHz - 3 GHz
EMC Emissions Level CISPR25 Frequency range: 30 MHz - 1 GHz, vertical & Horizontal
30-230 MHz: 36 dB (μV/m)
230MHz - 1GHz: 43 dB (μV/m)
ESD Immunity Level ISO 10605: 2008 8kV contact (including wires); 15kV air discharge
Power Field Immunity ISO 11452-8: 2007 100A/m 50Hz - 60Hz
Vibration (Sinusoidal) ISO 60068-2-6: 2008 3gn, 10-200Hz, 1h per axis
Vibration (Random) EN 60068-2-64: 2008 3gn, 10-200Hz, 2h per axis
Shock EN 60068-2-27: 2008 50gn, 1/2 sine 6ms, 3 shocks in 6 directions
Bump EN 60068-2-27: 2008 25g, 10ms, 500 bumps in each of the 6 directions