APEM 11000 Toggle Switches

11000 Series Toggle

The APEM 11000 series switches are specially manufactured for defence and telecommunications applications.

These switches have following approvals: CECC 96201-005 and CECC 96201-008. They are robust switches for high specification environments. Designed with toggle action on 2-position models giving smooth mechanical operation. Plastic material with high insulation resistance. Several front panel sealing options and with a choice of bright chrome or matte black finish.

Upon request, each individual switch can be submitted to a low-level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of reliability (military, etc.).

View all PCB mounting toggle switches here.

View all panel mounting toggle switches here.

 

Quote

Description

The APEM 11000 series switches are specially manufactured for defence and telecommunications applications.

MAIN FEATURES

  • Approvals: CECC 96201-005 and CECC 96201-008
  • Robust switches for high specification environments
  • Toggle action on 2-position models giving smooth mechanical operation
  • Plastic material with high insulation resistance
  • Several front panel sealing options
  • Bright chrome or matte black finish

Upon request, each individual switch can be submitted to a low-level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of reliability (military, etc.).

View all APEM products here.

Follow us on Facebook

• Torque:1.25 Nm (.92 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness: 2.5 mm (.098) max.

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

MATERIALS
• Case: diallylphthalate (DAP)
• Actuator: brass, nickel plated
• Bushing: brass, nickel plated
• Housing: brass, nickel plated
• Contacts
A: silver
AD2: gold plated silver (2 microns gold)
X780: solid rivet - gold plated silver/nickel alloy
D: solid gold rivet
X910: silver/nickel alloy
• Terminal seal: epoxy
• AD2 and X780 contacts can be used for high-level applications. In this case, the
gold layer is considered only as a protection against oxidation during storage.

• Max. current/voltage rating with resistive load:
- silver contacts (A-AD2-X780): 4 A 30 VDC
- gold contacts (D): 100 mA 30 VDC
• Minimum load: AD2-X780-D contacts: 10 mA 50 mV, 10 µA 5 V min.
• Initial contact resistance: 10 mΩ max.
• Insulation resistance: 1,000 MΩ min. at 500 VDC
• Dielectric strength:
1,000 Vrms 50 Hz min. between terminals
2,000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce: 2 ms max

Related Products