ZP Series Push Button

• Travel :
- function 2 (ON-MOM) : 1,2 mm (.047) ± 0,3 (.11)
- function 3 (OFF-MOM) : 1 mm (.039) ± 0,3 (.11)
• Strength of terminals : pull-out force 10N max.
• Torque : 1Nm max. applied between the 2 nuts
• Max. panel thickness : 1,5 mm (.059) with 2 nuts
• Operating temperature : -30°C to +85°C
• Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3)
• Hand soldering : 280°C max. for 5 seconds max.
• Wave soldering : 260°C max. for 5 seconds max.

MATERIALS
• Case : thermoplastic UL94-V0
• Actuator : thermoplastic UL94-V0
• Bushing : zamak, tin plated
• Contacts and terminals :
0 : brass, gold plated (standard)
1 : brass, silver plated
3 : brass, gold plated (1,27 micron gold)
• Terminal seal : epoxy

• Max. current/voltage rating with resistive load :
- gold plated contacts : 0,4VA 20V max. AC or DC
- silver plated contacts : 0,5A 48V max. AC or DC
• Minimum load : 10mA 50mV - 10μA 5VDC
• Contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength:
1.000 Vrms 50 Hz min. between terminals and frame
500 Vrms 50 Hz min. between terminals
• Electrical life at full load :
- gold plated contacts : 60.000 cycles
- silver plated contacts: 20.000 cycles