Seika SBG3I Sensor Box

SBG3I Sensor Box

Sensor box containing three SEIKA sensors and three signal conditioners with 4 – 20mA output.

The SBG3I is a pressure die cast aluminium sensor housing (IP65) with two integrated sensors for measuring accelerations and/or inclinations along three axis acceleration and/or two axis inclination.
As well as the sensors, the box contains three independent signal conditioners, each with a 4 – 20mA, 2-wire output, and three separate, highly stable voltage supply feeding off the corresponding current loop, one for each sensor. Furthermore, each signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, an output stage with current limitation, a noise voltage filter and a diode bridge for unipolar connection to the current loop. Interference signals caused by unwanted ground currents are eliminated by electrically isolating each sensor and signal conditioner from each other and the housing.
A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensors. The compact PG cable gland and compact housing size in combination with the 3-wire connection enable the use of this high quality measuring system in harsh operating conditions.

  • Robust pressure die cast aluminium housing (IP65) with saltwater proof coating
  • Twist free 4-point fastening of rigid, 3.2 mm thick base PCB
  • Three integrated signal conditioners with 4-20mA, 2-wire outputs
  • No separate supply voltage necessary
  • All SEIKA sensors of the B-, BD- and N- series for the housing and cab be installed in different directions of operation
  • Output signals calibrated to customer’s specifications
  • Sensors and signal conditioners electrically isolated from housing
  • Both output channels are electrically isolated from and independent of each other
  • EMC certified
  • Internal highly stable sensor supply voltages
  • 10-30V terminal voltage
  • Programmable dynamic response
  • High mechanical overload resistance
  • Either connection polarity – possibility of 4 -wire connection for both measuring loops
  • Low pass filter with optional choice of cut off frequency for suppression of interference frequencies

View all Sensor Boxes

 

Quote

Description

The SEIKA SBG3I sensor box containing three SEIKA sensors and three signal conditioners with 4…20mA output.

The SBG3I is a pressure die cast aluminium sensor housing (IP65) with two integrated sensors for measuring accelerations and/or inclinations along three axis acceleration and/or two axis inclination. 
As well as the sensors, the box contains three independent signal conditioners, each with a 4…20mA, 2-wire output, and three separate, highly stable voltage supply feeding off the corresponding current loop, one for each sensor. Furthermore, each signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, an output stage with current limitation, a noise voltage filter and a diode bridge for unipolar connection to the current loop. Interference signals caused by unwanted ground currents are eliminated by electrically isolating each sensor and signal conditioner from each other and the housing.
A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensors. The compact PG cable gland and compact housing size in combination with the 3-wire connection enable the use of this high quality measuring system in harsh operating conditions.

  • Robust pressure die cast aluminium housing (IP65) with saltwater proof coating
  • Twist free 4-point fastening of rigid, 3.2 mm thick base PCB
  • Three integrated signal conditioners with 4-20mA, 2-wire outputs
  • No separate supply voltage necessary
  • All SEIKA sensors of the B-, BD- and N- series for the housing and cab be installed in different directions of operation
  • Output signals calibrated to customer’s specifications
  • Sensors and signal conditioners electrically isolated from housing
  • Both output channels are electrically isolated from and independent of each other
  • EMC certified
  • Internal highly stable sensor supply voltages
  • 10-30V terminal voltage
  • Programmable dynamic response
  • High mechanical overload resistance
  • Either connection polarity – possibility of 4 -wire connection for both measuring loops
  • Low pass filter with optional choice of cut off frequency for suppression of interference frequencies

View all SEIKA products here.

Follow us on Facebook

Related Products