IP Series Latching Push Button

APEM IP Series latching Push Button can be Illuminated or non-illuminated action push buttons for harsh environments, sealed to IP67 and IP69K (non-illuminated models). High brightness illumination available. Round or square actuator, available in many different colours. Numerous terminal options, gold-plated silver contacts.

Latching action: actuator remains in the low position when ON. Flat round actuator for optional marking. Compact: behind-panel depth less than 20 mm (.787)

Four LED colours to select from and they are tin-plated LED terminals.

NOTE: Momentary version also available.

View all push buttons here.

 

Description

Illuminated or non-illuminated latching action push buttons for harsh environments, sealed to IP67 and IP69K (non-illuminated models). Round or square actuator, available in many different colours. Numerous terminal options, gold-plated silver contacts.

MAIN FEATURES

  • Latching action: actuator remains in the low position when ON
  • Illuminated and non-illuminated
  • Flat round actuator for optional marking
  • Compact: behind-panel depth less than 20 mm (.787)
  • High brightness illumination
  • Four LED colours
  • Tin-plated LED terminals

NOTE: Momentary version also available.

View all APEM products here.

Follow us on Facebook

• Panel thickness: 1.5 mm (.059) min. 5.5 mm (.217) max.
• Total travel: 2.5 mm (.098) +/- 0.3 mm
• Typical operating force: 10 N
• Low level/mechanical life : 200,000 cycles
• Torque : 1.5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
• Operating temperature: -40°C to +85°C (-40°F to 185°F)

MATERIALS
• Case: thermoplastic, UL 94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast (zamak), black painted
• Contacts: silver, gold plated
• Output wires (flying lead terminals):
F version: AWG20, section 0.6 mm2
W version: AWG24, section 0.23 mm2
• LED wires:
F version: AWG26, section 0.12 mm2
W version: AWG24, section 0.23 mm2
• Lens: polycarbonate
• Terminal seal: epoxy

• Max. current/voltage rating with resistive load:
4A 12VDC, 200,000 cycles
1A 48VDC, 200,000 cycles
2A 48VDC, 100,000 cycles
3A 48VDC, 75,000 cycles
1A 72VDC, 15,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500VDC
• Dielectric strength: 1.500 Vrms between terminals - 1.000 Vrms between terminals and frame

<