APEM 13000 Professional Quick Break Push Button

13000 Series Professional Quick-break Push Button

APEM 13000 series high reliability single pole and double pole momentary push buttons, with silver or gold-plated contacts. The bushing Ø 6,35 (1/4) and 11,9 (15/32) sized. The push buttons are designed for panel or PCB mounting. They are UL and CECC approved. Designed to European MIL specs.

View all push buttons here.

View all PCB push buttons here.

 

Quote

Description

The APEM 13000 series professional quick-break push button has high reliability single pole and double pole momentary push buttons, with silver or gold-plated contacts.

MAIN FEATURES

  • For panel or PCB
  • UL and CECC approved
  • Designed to European MIL specs.
  • Bushing Ø 6,35 (1/4) and 11,9 (15/32)

View all APEM products here.

Follow us on Facebook

• Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut
• Standard panel thickness : 2 mm (.078 ) max.
• Total travel : 2 mm (.078)

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature : -40 °C to +85 °C

MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, nickel plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts :
A : silver
AD2 : silver, gold plated (2 micron gold)
CD : brass, gold plated
• Terminal seal : epoxy

Note : AD2 contacts can be used for high level applications.In this case, the gold layer is considered only as a protection against oxidation during storage.

• Max. current/voltage rating with resistive load :
- silver contacts (A-AD2) : 4 A 30 VDC
- gold plated contacts (CD) : 100 mA 30 V
• Minimum load (AD2-CD contacts) : 10 mA 50 mV, 10 μA 5 V min.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
1,000 Vrms 50 Hz min. between terminals
2,000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max.

Related Products