บริการลูกค้า 09 9824 5451
Lost password?
ความเป็นเลิศด้านวิศวกรรม
Makersan MO 420 Pressure Sensor designed for safety, control applications. They are sealed and reliable sensors covering a whole range…
Makersan MO 450 Rotary Position Sensor designed for safety, control applications. They are sealed and reliable sensors covering a whole…
The Makersan MO 651 H3X Remote Keyless Entry is suitable for door latches, trunk lids and lift gates. Designed with…
The Makersan MO 651 H4X Remote Keyless Entry is suitable for door latches, trunk lids and lift gates. Designed with…
The Makersan MO 651 H5X Remote Keyless Entry is suitable for door latches, trunk lids and lift gates. Designed with…
Function can be ordered with new meters as well as activated on the device which have been already installed on…
TER Signal Lamps: Motor Sirens features a powerful low frequency sound. It is designed to effectively alert large areas by…
Mounting device on DIN rail, table, wall or vertical grid. Kit contains: A. Two special attachment clips. B. 4 screws…
Installation Kit on DIN RAIL for in-head converters. The kit ACK103 (KOS Converters) Includes: A. 1 M4 screws to secure…
Mounting hardware for switches : knurled and hex nuts, locking rings, lockwashers, cap nuts, dress nuts, ground connectors and sealing…
APEM MP Series 2-step push button switches take remote control to a new level of safety. These push buttons are…
Joysticks are the most suitable hand controllers for dynamic applications such as remote vehicle operation and camera tracking systems, and…
Protocol can be ordered with a new device as well as activated on the devices which have already been installed…
Gladiator Technologies MRM60 Analog IMU is a high Performance six-axis MEMS IMU with Analog output. Equipped with low noise sensors,…
The MS Series joystick is a contactless, Hall effect controller developed for demanding operator control applications that require a rugged,…
Lumel MS8221A Portable Pocket size Digital Multimeter is equipped with a large, easy to read LCD display.
MSG Switch Guard for 12000 - 3500 - 600H - 6000 is a new range of switch guards combining modern…
APEM MT series is an environmentally sealed rocker switch that is actuated with a rocking motion. Multiple single functions available.…
Trackballs are ideal for applications that require the precise positioning of a cursor on a display screen. Daco trackballs are…
The APEM MU Series PCB switches are a reliable solution for directional control in electronic devices. The MU series is…
TER Signal Lamps: Multi-colour RGB Warning Lights are high-quality and energy efficient indicators providing different colour options by mixing the…
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the…
Simplicity and reliability makes the Multimec 3C an excellent switch for build-in and over-mould solutions. In addition, the switch is…
Multimec 3E series switches have a hole in the switch body for mounting caps. This switch series is used for…
Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also…
Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body.…
Multimec 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The…
Small Inclinometers for measurement in the ranges of ±10, ±30 and ±70 degrees. The N2, N3 and N4 are capacitive,…
Central Measurement N100 N100 - it is a successor of N10 meters - one of the most popular meters on…
The N14 meter is a programmable digital panel instrument designed for the measurement of 3-phase, 3 or 4-wire power network…
The N20 meter is a digital programmable panel instrument designed for measurements of DC voltages, DC currents or temperature. The…
The N20HPLUS meter is a digital programmable panel instrument designed for measurement of DC voltages up to 400V. The readout…
The N20PLUS meter is a digital programmable panel instrument designed for measurements of DC voltages, DC currents or temperature. The…
The N20Z meter is a digital programmable panel instrument designed for measurements of AC voltages, AC currents or frequency. The…
The N20ZPLUS meter is a digital programmable panel instrument designed for measurements of AC voltages, AC currents or frequency. The…
N21 is an ideal solution for visualisation of industrial processes. Universal input, universal supply and universal OLED display allow to…
Indicators of N24 series are designed for measurement of DC voltage or DC current, temperature from Pt100 sensors and J,…
Designed for measurement of RMS current and voltage (AC) active power and frequency. Thanks to modern design, N27D fulfills the…
Designed for direct or indirect measurement of 1-phase network parameters: U, I, f, P, Q, S, PF, tg, fi, fi,…
The N30H meter is designed for the measurement of DC current and DC voltage up to 5A and 600V.
The N30O meter is designed for the measurement of pulses, frequency, rotational speed, period and worktime. The meter has 2…
N30P meter is destined to measure: AC voltage, AC current, active, reactive and apparent power, cos φ, tg φ, φ,…
N30P meter is designed to measure: AC voltage, AC current, Active, reactive and apparent power cos φ, tg φ, φ,…
The N30U meter is designed for the measurement of temperature, resistance and standard signals.
Lumel N31U Digital Meter is a new programmable meter designed for the measurement of standard analog signals sed in automation.…
Lumel N32H Programmable Digital Meter of DC circuit parameters has a modern and easy-to-read LCD display, universal measuring input and…
The Lumel N32O programmable digital meters of pulses, frequency, rotational speed. The N32O digital meter is modern and easy to…
Lumel N32P Digital meters has extended by the introduction of N32P a programmable meter for 1-phase power network parameters. COMING…
